Seals & repair kits.
Prepare the packed part.

How the part family changes the brief

A kit is a set, not a single part. The first question is whether pieces may mix, need separation or must remain visibly associated with one part number.

Packaging risks to review

• Small pieces can be lost at opening or during counting.
• Mixed materials can rub or catch on one another.
• A label can describe the kit while individual pieces remain unidentified.
• Repeated access can damage a simple closure or opening.

Information worth sending first

• The complete bill of pieces per set
• Whether parts may mix or need separation
• Opening, counting and identification needs

Bag format discussion

Start from how the pack is filled, carried, opened and stored. A flat bag, handled bag, zip-seal bag or easy-tear bag may each be discussed, but the format name does not establish dimensions, film or performance. Do not assume internal dividers or connected pouches. Any extra construction needs a separate review.

Sample and verification checklist

1. List every piece and quantity in the kit.
2. Confirm whether separation is required or merely preferred.
3. Test counting and access with the complete set.
4. Check that the pack label and any internal list agree.

What needs project confirmation

Film grade, thickness, usable opening, print layout and special performance are reviewed together. Sampling is available; scope, timing and cost are agreed individually. Production timing and commercial terms remain subject to quotation. Requests for ESD, corrosion, barrier, cleanliness or fluid-contact performance need an explicit technical review.

Preparation questions before an RFQ

Before asking for a price, record the packed outline, the number of pieces in one pack and the condition in which the part arrives. State whether it is dry, oiled or handled with gloves, and whether the pack is opened once or more often. These details change the discussion more than a generic material name.

Keep a photo or drawing tied to the part reference. A vehicle model or catalog image can help identify the component, but it does not replace packed measurements. If a current bag is in use, send its measured dimensions and note what works or fails.

How to compare a sample

Compare samples with the same component and pack quantity. Check the opening, seam, closure and label after filling, then repeat the handling step that matters for the route. Write down the result and keep the sample reference with the artwork version so a later change is not confused with an approved arrangement.

Transit protection remains a separate question. A flexible bag can contain and cover the part, while an outer carton, divider or other support controls movement and external load. Review the complete packing system before treating a bag trial as a transit result.